Quantum Analytics
  • Products
    • Liquid Chromatography
      • Liquid Chromatography Systems
      • LC-MS Systems
      • LC-MS Sample Prep & Introduction
    • Gas Chromatography
      • GC Systems
      • GC-MS Systems
      • GC-MS Sample Prep & Introduction
      • Pyrolyzers
    • Ion Chromatography
    • Mass Spectrometry
      • GC-MS Systems
      • GC-MS Sample Prep & Introduction
      • Pyrolyzers
      • LC-MS Systems
      • LC-MS Sample Prep & Introduction
      • SIFT-MS
      • Trace Elemental Analysis
    • Molecular Spectroscopy
    • X-Ray Diffraction & Elemental Analysis
    • Refurbished Instruments
  • Markets
    • Automotive
    • Cannabis Testing
    • Clinical
    • Environmental
    • Food, Fragrance and Flavor
    • Energy & Chemicals
    • Pharmaceutical
    • Semiconductor
  • Financing
  • Resources
    • Application Notes
    • Live Webinars
    • On-Demand Webinars
    • Seminars & Workshops
    • Trade Shows & Conferences
  • Our Company
    • News
    • Our Partners
    • Service
    • Careers
  • Contact Us

Products  •  X-Ray Diffraction & Elemental Analysis  •  Inorganic Elemental Analysis

Inorganic Elemental Analysis

The elemental composition of a material determines its properties. Elemental analysis is therefore essential for the characterization and quality control of materials that need to meet certain requirements.

Elementar’s user-friendly inductar® series for inorganic elemental analysis uses the high-temperature combustion method to determine elemental concentrations of carbon, sulfur, oxygen, nitrogen, and hydrogen and is the ideal solution for R&D, routine, and high-throughput laboratories.

inductor CS cube

inductar CS cube

Advanced carbon and sulfur analyzer for inorganic materials

The inductar CS cube analyzer combines highly accurate data with easy to use, clean, and automated processes. Experience the new level of carbon and sulfur determination in metals and inorganic materials. The new inductar CS cube is full of innovative and advanced ideas to make CS analysis easy to use and more reliable.

  • Highest accuracy and precision (1 ppm abs. or 0.5/1.0 % RSD C/S) at very low concentrations.
  • Direct analysis of the original sample without time consuming, wet chemical pre-treatment.
  • Large sample amounts.
  • Fully automatic determination in approx. 2.5 minutes

Conforms with ASTM Norms: E1019, E1915, E1941, E2050

inductar onh cube

inductar ONH cube

Simultaneous ONH elemental analysis in metals and ceramics

The inductar ONH cube is an innovative elemental analyzer, which is able to analyze oxygen, nitrogen and hydrogen concentrations in inorganic materials simultaneously.  This high-precision ONH analyzer for metallic or ceramic materials is equipped with a long-life solid-state high-frequency induction furnace, which makes it possible to reach sample temperatures of up to 3000 °C. Thanks to an optional camera the gas release can be observed in real-time by the operator. Also, for the element detection advanced technologies are used. Oxygen is analyzed by a wide-range IR detector, which is capable to detect the whole concentration range. For the precise hydrogen analysis, a unique electrochemical detection technology finds usage for the first time. The nitrogen analysis by a well-known thermal conductivity detector completes the precise and simultaneous 3-element analysis of oxygen, nitrogen and hydrogen in one cycle. 

  • Highest accuracy and precision for wide concentration range down to very low concentrations.
  • Direct analysis of the original sample without time consuming, wet chemical pre-treatment.
  • Large sample amounts.
  • Fully automatic determination in approx. 5 minutes.

Conforms with ASTM Norms: E1019, E1409, E1447, E1569, E2575, E2792, E2857

acquray toc analysis

inductar EL cube

High temperature elemental analysis of C, S, O, N, and H in inorganic materials

For the first time in history of inorganic elemental analysis it is possible to analyze 5 elements in 1 analyzer. The newly developed and worldwide unique inductar EL cube sets new standards in flexibility and precision with its innovative solutions and state-of-the-art technology. It is equipped with a long-life solid-state high-frequency induction furnace, which makes it possible to reach a sample temperature of up to 3000 °C. Thanks to an optional camera the gas release can be observed in real-time by the operator. Also for the element detection new technologies are used. Carbon, sulfur and oxygen are analyzed with a wide-range IR detector, which are capable to detect the whole concentration range. For the precise determination of hydrogen an innovative detection technology finds usage for the first time. The concentration of the fifth element nitrogen is detected via TCD.

Compatible with ASTM Norms: E1019, E1915, E1941, E1019, E1409, E1447, E1569, E2575, E2792, E2857

Request for Information

Quantum Analytics 3400 East Third Avenue , Foster City, CA 94404
Tel: 800-992-4199 (Toll Free) | Tel: 650-312-0900 | Fax: 650-312-0303

A BLACK FOREST VENTURES COMPANY · COPYRIGHT © 2017 QUANTUM ANALYTICS · ALL RIGHTS RESERVED · TERMS & CONDITIONS